Description This Dimmer Receiver / Controller can be controlled using the onboard buttons, remote Push Dim or with any of Skydance’s single colour remote controls . With a current rating up to 20A it can operate a large quantity of single colour LED strip lights. The versatility of this controller allows it to suit a wide variety of applications. Buttons There are three buttons located on top of the controller. These allow on/off and brightness up and down control. Push Dim Short Press – turn on or off Long Press – press and hold for step-less dimming With every other long press, the light level goes to the opposite direction RF Control Pairing the receiver is simply performed by: A short press of the match key on the receiver / controller. Followed by an immediate press of the on/off key on the remote. The LED indicator on the remote control will fast flash a few times, indicating the match is successful. FEATURES: Output power: 20A 240W @ 12V /480W @ 24V 100 levels 0~100% brightness Soft start selectable (ramp up time) PWM frequency selectable; 240-480W@250/500/2KHz 180-360W@4K/8KHz 144-288W@16KHz Smooth dimming without flicker Light returns to the previous dimming level when switched off and on again, even at power failure 30m range (with auto retransmission), receiver automatically transmits the signal to another receiver within 30m 1 remote can be paired to an infinite number of receivers Up to 10 remotes can be paired to just 1 receiver
