Description uPowerTek’s APD-075-C070-ARE is a 75W constant current D4i, DALI-2 and 0-10V dimmable LED driver. This driver’s output current can be set anywhere from 45 to 700mA, however full power is achieved between 450~700mA. The driver’s current output and other parameters are programmed using NFC from a PC attached antenna or by mobile phone. Once the driver is programmed, it is then set and forget. However the driver can be reprogrammed to another current output if required. uPowerTek’s Programmable Functions uPowerTek LED drivers offer a range of configurable functions to meet specific lighting requirements. The Output Current, Dimming Mode, Dim Off/On Voltage Threshold, and Timer Dimming can be set as basic programming functions. Constant Lumen Output (CLO) can also be customized to ensure consistent light performance. Additionally, depending on the different product model numbers, users can benefit from programming Thermal Protection by external NTC (with extra cable), DALI/D4i Features, and DMX addressing. Required Programming Equipment To program uPowerTek LED drivers, users will need specific equipment based on their preferred method. For NFC wireless programming, users can use a smartphone with either IOS or Android, the uPowerTek NFC Programmer, or the FEIG NFC Programmers. These tools ensure a seamless and efficient setup process, realising precise customization of the LED driver settings. uPowerTek Software Download Links uPowerTek APD-075-C070-ARE 75W 450~700mA D4i, DALI-2, 0-10V Dimmable LED Driver Features Constant current: 450~700mA (75W) <450mA (<75W) see Output Range tab Max. output power: 75W D4i / DALI-2 0-10V dimmable High efficiency Wide input voltage range 10kV surge protection Compact design IP20 Nominal life-time of 100,000hr @ Tc=75℃ 7 year warranty @ Tc=75℃ Protections Over temperature Overload Short-circuit
